首 页
产品中心
关于我们
付款方式
相关网站
    
 首页 > 397任意波形发生器

美国福禄克FLUKE397任意波形发生器

397任意波形发生器
产品名称：美国福禄克FLUKE 397任意波形发生器
产品型号：397任意波形发生器
生产厂商：美国福禄克FLUKE
更新日期：2010-4-6 19:10:15
作为美国福禄克FLUKE397任意波形发生器代理商, 中仪在北京 上海 南京 武汉 深圳 佛山 天津 重庆等地提供售前、售后维修服务,您有任何问题请致电全国免费电话400-663-9117。

397任意波形发生器商品简介：
范围：0.1mHz-50MHz

397任意波形发生器详细信息：
397任意波形发生器介绍
125 MS/s high performance universal waveform generators Unprecedented combination of universal generator synthesizer
Versatile performance
High resolution wide frequency range
Extremely good performance-to-price ratio
The dual-channel 397 systems breaks new ground in universal waveform generator design. With its unprecedented combination of universal generator synthesizer, versatility, high resolution wide frequency range, extremely good performance-to-price ratio, the 397s offer a range of benefits that will facilitate work in many fields.
The Fluke 397 dual channel arbitrary waveform generator breaks new ground in value. This high performance signal source features an unprecedented combination of vertical resolution, memory depth sample rate.
14-bit resolution. The 14-bit resolution provides 16,384 output levels to generate audio waveforms with excellent fidelity. It also allows video other complex waveforms to be generated with small details superimposed on large signals.
Fast sample rate. The 125 MS/s sample rate translates into excellent performance at high frequencies, meeting the requirements of deming applications like telecommunications, radar, ultrasonic audio video communication.
Deep memory. The 397 offers 4 MB word memory, which can be divided into as many as 2048 segments. When combined with the 14-bit vertical resolution sample rate, the 397 offers enormous flexibility power for creating custom complex arbitrary waveforms.
Stard waveforms. Output frequency range is 100 mHz to 50 MHz for sine, square up to 12.5 MHz for triangle, pulse/ramps, Gausian pulse, exponential decaying/rising pulse sine(x)/x stard waveforms with rom noise a dc source. Output amplitude range can be adjusted from 10 mV to 10 V p-p into 50 Ω within a ±5 V window.
The 397 generator is also equipped with a SYNC/Marker output. Available in all modes, the output generates pulses synonous with the output waveform or in FM sweep modes the output generates a marker at designated sample clock frequencies. A multi-instrument synonization connector is provided to synonize one instrument to multiple slave units, thereby creating a multi-channel fully synonized jitter-free system.
ArbExplorer Software for Windows® is included as stard for automated test application simplifying arbitrary waveform creation editing. The 397 has IEEE 488.2, USB 10/100 Ethernet.
Dual channels. The 397 is a dual channel arbitrary waveform generator with two channels that share a single sample clock in order to provide tight control over inter-channel synonization leading edge start phase, the initial skew between two channels is just a few nanoseconds. Each channel can be controlled separately to generate different waveform, amplitude waveforms sequence.
The 2-channel output signal’s inter-channel operation is controlled by two parameters: leading edge offset, which causes the edge of channel 2 to trail channel 1 by a programmable number of points; channel 2 sample clock divider, which divides the sample clock source to channel 2 from 1 to 64 k.
The sample clock can be frequency modulated by stard or arbitrary waveforms. User defined modulating arbitrary waveforms can be of any shape from 10 to 20 k points sampled at a rate up to 2 MS/s. The 397 also generates FSK ramped FSK linear or logarithmic sweep outputs.
Output waveforms are generated in normal (continuous), triggered, ed burst gated operating modes. Trigger source can be either internal (100 mHz to 2 MHz) or external TTL, positive or negative 2 MHz to dc signal.
Sequence generator. When the sequencing facilities are invoked, the 397 becomes truly unique. The memory segments can be linked repeated in any combination, both manually under programmed control. Additional versatility is obtained by using the independent sequencing on the two channels.
In the automatic advanced mode, the complete sequence runs continuously automatically under the control of a pre-programmed table.
In the stepped sequence-advance mode, the current segment is looped continuously until a trigger is received, when the next segment is invoked. The single sequence advance mode runs the current segment once only, then idles until the next trigger is received.
 

Waveforms
 
Stard waveforms: sine, square, triangle, ramp, sinc, pulse, noise, Gaussian as well as dc
Sine
Range
0.1 mHz to 50 MHz
Resolution
7 digits or 0.1 mHz
Accuracy
< 1 ppm for 1 year
Temp. coefficient
< 1 ppm/°C
Harmonic distortion non related spurious below 10 MHz
< 0.1 % THD to 100 kHz (2000 waveform points)
 
< –55 dBc to 1 MHz
 
< –40 dBc to 5 MHz
 
< –35 dBc to 10 MHz
 
< –22 dBc to 50 MHz
Square
Range
0.1 mHz to 50 MHz
Resolution
0.1 mHz or 7 digits
Rise fall times
< 10 ns
Triangle
Range
0.1 mHz to 12.5 MHz
Resolution
0.1 mHz or 7 digits
Accuracy
1 ppm for 1 year
Linearity error
< 0.1 % to 100 kHz
Pulse
Range
0.1 mHz to 12.5 MHz
Delay
0 % to 99.9 % of period
Rise fall times
0 % to 99.9 % of period
High time
0 % to 99.9 % of period
Resolution
0.10%
Arbitrary Waveforms
Stored waveforms
397: Up to 4096 each channel
Waveform length
16 to 4 M points
Vertical resolution
14 bits
Sample clock range
100 mHz to 125 MHz
Waveform sequencing
Up to 4096 segments may be linked. Minimum segment duration 1 µs. Segments can be looped up to 1,000,000 times
Amplitude
Output impedance
50 Ω
Amplitude Range
10 mVpp to 10 Vpp (20 mVpp to 20 Vpp into open circuit)
Accuracy
< 1 % ± 25 mV between 1 V to 10 Vpp into 50 Ω
Flatness
± 5 % to 10 MHz; ± 20 % to 50 MHz
DC offset
± 4.5 V into 50 Ω. DC offset plus signal peak limited to ± 10 V. DC offset attenuated with amplitude range
Output Filters
 
50 MHz Elliptic 2 MHz Elliptical
Modulation Modes
Triggered burst
Each active edge of the trigger signal will produce one burst of the carrier waveform, waveforms starts from point n completes at point n-1
Gated
The selected waveform is output continuously at the programmed frequency while the selected gate signal is true
Waveforms
All stard arbitrary
Carrier frequency
125 Msample/s for ARB Sequence. 2.5 MHz or the maximum of selected waveform
No. of cycles
1 to 1,000,000
Trigger source
Manual trigger key, adjacent channel or internal trigger generator or external trigger input or remote trigger comm
Trigger rate
Internal trigger generator: 0.1 Hz to 2 MHz; External signal: dc to 2 MHz
Start/stop phase
± 360 ° , settable to 0.1 ° subject to waveform frequency type
Frequency sweep
Manual, continuous, triggered; linear or logarithmic sweep; up or down. Variable sweep marker.
Sweep range
1 mHz to 125 MHz
Sweep time
1 ms to 999 s
Sweep trigger source
External trigger input or remote trigger comm
Tone switching
FSK tone switching for all waveforms
External AM
Via rear panel BNC input, dc-500 kHz for all stard arbitrary waveforms

 

Outputs Inputs
Main outputs
397:00:00
Two channel
Sync outputs
 
Front panel BNC connector generates sync pulse synonous with output waveform. In FM sweep modes this output is synonous with sample clock frequencies
Ext. trigger
 
DC to 2 MHz. Threshold nominally TTL level; maximum input 5 V. Selectable as positive rising edge or negative falling edge. Minimum pulse width 20 ns for trigger gated modes
AM input
 
0 V to +5 V (5 Vpp) produce 100 % modulation
Ref clock in
 
Input for an external 10 MHz reference clock. Threshold nominally TTL level.
SCLK output, SCLK input DSUB connector
 
Connect instruments to achieve synonization. DSUB 9- pin connector cable supplied.

 

Inter-Channel Operation
Inter-channel modulation
 
The waveform from any channel may be used to amplitude modulate (AM) the adjacent instrument/channel. Alternatively, any number of channels may be modulated (AM) with the signal at the modulation input socket.
Carrier frequency
 
Entire range for selected waveform
Carrier waveforms
 
All stard arbitrary waveforms
Modulation freq.
 
DC to 500 kHz
Modulation depth
 
0 % to 100 %
Inter-channel synonization
397:00:00
Both channels are tightly synonized in phase waveform start. Channel 2 has sample clock divider for arbitrary sequenced waveforms.
Phase resolution
397:00:00
1 sample clock period of channel 2
Skew error
397:00:00
± 2 ns
Inter-instrument synonization
 
Two or more instrument may be slaved to one instrument. Each Slave can have a unique phase resolution relative to the Master.
Phase error
 
4 points
Skew error
 
+/-20ns Typically with 20c"m coax cable

 

General Specifications
Waveform Software
 
ArbExplorer Software for Windows is supplied with each instrument. This provides full waveform creation, editing management including an equation editor, clipboard import/export freeh drawing.
Interface types
397:00:00
GPIB, USB Ethernet
Remote control
 
Full remote control facilities are available through the interfaces
RS-232
 
Variable Baud rate, 115 k Baud. 9-pin D-connector
GPIB
 
Conforms with IEEE-488.1 IEEE-488.2
Ethernet
397:00:00
Twisted pair 10/100Base-T, auto negotiation
USB
397:00:00
Type A receptacle, version 2.0
Display
397:00:00
3.5 in color LCD reflective, 320 x 240 pixels, back-lit
Size
 
88 x 415 x 212 mm (H x D x W)
Weight
 
6 kg (13 lb)
Power
 
85 V to 265 V, 48 - 63 Hz, 60W
Operating temperature range
 
0 °C to 50 °C
Operating huity (non condensing)
 
11 °C to 30 °C 85 % RH;
 
31 °C to 40 °C 75 % RH;
 
41 °C to 50 °C 45 % RH
Storage range
 
–20 °C to + 60 °C
Environmental
 
Operating altitude: 10,000 feet
 
Storage: 15,000 feet
 
Pollution degree 2
Safety
 
Complies with EN61010-1
EMC
 
Complies with EN61326, CE marked

 
 


397任意波形发生器相关产品：
调频调幅信号产生器GSG-120
信号发生器FG-7002C
SP1461Ⅲ型信号发生器
音频信号发生器CA102P
音频扫频信号发生器TH1311
数字合成信号发生器VC5020
音频扫频信号发生器TH1312-100
信号产生器GFG-8217A
SP2461IV型信号发生器
SPF10信号发生器产
AFG3252任意波形发生器
标准信号发生器YB1061A
信号发生器PM5136
7016信号发生器
RP300电缆电视返回通路测试仪
SG1060数字合成信号发生器
立体声信号发生器SG-1501B
HMO3524 350MHz四通道混合信号示波器
信号产生器7011-已停产
数字合成信号发生器SG1040
标准视频信号发生器JC-GV100
高频信号源WY1052
GV798+电视信号产生器
PS410ECG心律失常模拟仪
29A 10MHz DDS信号发生器
397任意波形发生器
手持信号分析仪SA-77
PS420多参数患者模拟仪
IDA 4 Plus注射器分析仪
信号分析仪FSV
大电流发生器DDG系列
信号发生器SG-1710
SP2461Ⅰ型信号发生器产品
音频扫频信号发生器TH1312-20
RF303RS电外科学分析仪
电视信号发生器Fluke54000
任意波形发生器YB33051
信号产生器SFG-830
音频扫频信号发生器TH1312-60
SP1461V型信号发生器


397任意波形发生器全国售后维修：

代理商售后维修区域：北京-上海-浙江-广东-河南-杭州-郑州-广州-深圳-佛山-惠州-厦门-汕头-台湾-香港-天津-西安-宝鸡-杭州-温州-常州-无锡-苏州-南京-镇江-扬州-南通-合肥-徐州-常熟-石家庄-太原-呼和浩特-沈阳-长春-哈尔滨-南京-合肥-福州-南昌-济南-郑州-武汉-长沙-广州-南宁-海口-成都-贵阳-昆明-拉萨-西安-兰州-西宁-银川-乌鲁木齐-杭州-沈阳-长春-哈尔滨-济南-武汉-广州-南宁-成都-西安-大连-宁波-厦门-青岛-深圳-杭州-淮安-连云港-昆山-嘉兴-湖州-秦皇岛-邯郸-邢台-保定-张家口-承德-廊坊-呼和浩特-包头-鞍山-大庆-锦州-铁岭-盘锦-湛江-萧山-辽宁-淄博-宁夏-绵阳-云南-朝阳-陕西-青海-北海-唐山-吉林-苏州-昆山-无锡-镇江-常州-连云港-淮安-淮阴-盐城-扬州-徐州-宜兴-江阴-南通-扬州-上海-滁州-内蒙古-新疆有销售.北京亦庄开发区，天津滨海开发区，秦皇岛经济开发区，太原经济开发区，呼和浩特经济开发区，沈阳经济开发区，营口经济开发区，大连经济开发区，长春经济开发区，哈尔滨经济开发区，虹桥经济开发区，漕河泾开发区，连云港开发区，南通开发区，昆山开发区，南京开发区，杭州开发区，萧山开发区，温州开发区，宁波开发区，芜湖开发区，合肥开发区，福州开发区，福清融侨开发区，东山开发区，南昌开发区，威海开发区，烟台开发区，青岛开发区，郑州开发区，武汉开发区，长沙开发区，萝岗区开发区，广州南沙开发区，惠州大亚湾开发区，湛江开发区，南宁开发区，重庆开发区，成都开发区，贵阳开发区，昆明开发区，拉萨开发区，西安开发区，兰州开发区，西宁开发区，银川开发区，乌鲁木齐开发区，石河子开发区，金桥出口加工区，苏州工业园，宁波大榭开发区，厦门海沧投资区，海南洋浦开发区。